CFA Indirect Threading is the usual way in PFE and the traditional variant being the only one compatible with the FIG model. A colon word is a list of CFA addresses where the CFA contains the address of a C subroutine and the BODY of this word directly following this Code-Field (where CFA has its name from, the body being referred to as the Parameter-Field (PFA).
NFA LFA CFA PFA +---------+--------+---------+------- | name[n] | link* | code* | data.... +---------+--------+---------+------- nextNFA C call body(only for non-prims)
The DOES words will put a DOES-subroutine into the CFA of a CREATEd word - this DOES-subroutine will use the first PFA field to get the indirect address of the real (modified) behaviour of the word. The DOES_CODE field exhibits itself as just another CFA directly followed by its DOES_BODY. The current TO_BODY will detect the situation for a DOES-word and return DOES_BODY when someone asks for the BODY of a DOES-word - which means to return the address of PFA instead of PFA.
NFA LFA CFA PFA PFA +---------+--------+---------+--------+------- | name[n] | link* | code* | does* | data... +---------+--------+---------+--------+------- nextNFA do-does()
Before the DEFER words (including DOER/MAKE) became part of the inner system, they were just DOES-words who stored the DEFERred execution vector in the DOES_BODY. Therefore, the current implementation will store the IS-vector in PFA of a DEFER-word. This is in contrast with the behaviour of the TO-var word which will store its value into PFA.
NFA LFA CFA PFA PFA +---------+--------+---------+--------+------- | name[n] | link* | code* | unused | target +---------+--------+---------+--------+------- nextNFA do-defer()
Call-Threading is a newer model for execution. The colon word is a list of addresses of C subroutines. As long as theses are primitives (without a BODY area) it will obviously be as double as fast in execution since there is on memory access instead of two in the CFA Threading model - the latter would have to fetch the CFA from the colonword and the C subroutine address from the referenced Code-Field - while in Call-Threading it would just have to fetch the C subroutine address and use a normal indirect function call to get it executed.
However this would not quite allow parametric words other than in the Direct-Threading case - in Direct-Threading the BODY would be be prepended with a longer Code-Field which contains a complete subroutine as if assembled by a C subroutine compiler. Therefore in the Direct-Threading case, the inner interpreter could again just jump there as it would for primitives. Most of the Direct- Threading systems would just jump to the real common behaviour of the BODY-word - via the typical IP[-1] we still get the original CFA and can derive the PFA = IP[-1]+CodeFieldSize - where the CodeFieldSize is usuall larger than just a pointer since it would consist of cpu-native jump-instruction followed by the behaviour address compiled by the C compiler.
Well, this explains the model of Direct-Threading which would not be quite portable since it assumes knowledge about the cpu-native jump-instruction which would have to get pasted into the data-area of the application which gets then executed as code atleast for the CodeField part. On processors with different on-die caches for Data and Code, this would yield to considerable cache-thrashing, and some Forth implementations tried to overcome the problem by ensuring that the corresponding Data-area of a Direct-Threaded BODY-word gets put a bit away - with the distance being the cache-line length in the Instruction-Cache. Which of course assumes another set of knowledge for the underlying native cpu architecture. Therefore: Call-Threading is not Direct-Threading.
To enable BODY-words in Call-Threading we use another trick - for each BODY-word, an XT-compile ("compile,") will detect the situation and compile two addresses. The first one is the C-subroutine of the common behaviour of the BODY-word directly followed by the BODY-address of it. The behaviour-subroutine will then just have to fetch that BODY-address away so that the inner-interpreter will have its IP put onto the next real C-subroutine (and not a BODY-address). That's why you will see those POP_RT_BODY in each of the _RT-routines in the forth-implementation which will be a (*IP++) in Call-Threading model. Unlike the Direct-Threading model, the Call-Threading model is portable: the "compile," word will simply copy the address contained in the CFA to the new colonword and then add the BODY-address right thereafter.
VARIABLE XX : AA XX @ ; in ITC mode (indirected threaded via CFA subroutine calls) | name... | link | code'do-colon | cfa'XX | cfa'@ | cfa'; | n bytes LFA CFA cell cell cell in CTC mode (call threaded with conditional body pointer comma) | name... | link | code'do-colon | code'do-var | pfa'XX | code'@ | code'; | n bytes LFA CFA cell cell cell cell
One could think that one would be able to mix FIG-style CFA-Threaded colonwords and PFE-style Call-Threaded colonwords - the outer interpreter could in fact do both and runtime switchable - we would just have to swap the behaviour of "compile," while the rest could effectly stay the same. However, we can not do this in full FIG-style mode - the outer interpreter's "compile," word does need an additional information about each word telling whether it is a primitive or a body-word. As a side note: of course, a simplistic approach would just always add a body-field for each call and the inner interpreter fetches the code-address and the data-address (even when the data-adress is just null). But this would simply make two memory-accesses for all words including primitives and there is no benefit over CFA-Threading here.
Instead, we use an extra bit in the FlagField of each word which gets set when the word is not-a-primitive. In the pfe C-level sourcecode you will see two words for creating a HEADER: FX_HEADER and FX_RUNTIME_HEADER where the latter is just a combination of FX_HEADER followed by FX_RUNTIME_WORD where this one will just set a bit in the LAST word and this bit being called P4xISxRUNTIME. - Now, the "compile," word will check the FlagField for ISxRUNTIME being set, and only in this case a BODY-address gets compiled. When no word has this FlagBit set then a Call-Threaded colonword will just be a list of C-subroutine addresses.
This makes it a very fast implementation - each primitive gets called with just an indirect-functioncall (instead of a double-indirect one), and only BODY-words will use more memory-accesses, which they would do anyway since they will surely access the data in their body. However, there is even another surplus - it makes it easier to have forth integrate with C-level projects since we are now able to construct new colonwords directly in C without the help of an inner interpreter or even "compile,". The C-level app would just have to create a list of function-pointers, adding body-address for each reference to an _RT-named routine. When the C-level-created forth-colonword has been created (as a ":noname"-colonword) the it can just be p4_call'ed.
(FIXME: stick note about implemenation of DOES-words and DEFER-words in here)
From aboves model for Call-Threading we can now derive the model for SBR-Threading - there is only one difference between the two here: in SBR-Threading each of the CALL-addresses gets prepended with the cpu-native bits for an SBR-functioncall. And be noted: on many RISC- machines these bits are mangled into the CALL-address itself, usually the upper four bits so that on a 32-bit machine only the lower 28-bit addresses are reachable for CODE jumps. On machines like the i386 architecture, the cpu-native SBR-functioncall is a single byte (9E) so the code-size will increase by another 25% (CFA-Threading vs. CALL-Threading had increased the executable size by about 20%).
This derivation is largely different than SBR-Threading derived from Direct-Threading - and it does more closely follow the nativecode scheme for creating BODY-words like accessing Variables and Constants. The nativecode would just put another cpu-native bit followed by the address of the Variable to fetch. This leaves room for a nativecode optimizer which could replace the sequence (call-nativecode + varfetch-routine + vardata-address) by an optimized sequence of (varfetch-nativecode + vardata-address).
The same optimizer can be used for DOES-words: the sequence of (call-nativcode + doescall-routine + doescode-address) could get replaced with (indirectcall-nativecode + doescode-address). The doesdata-field is still easily derived as it still follows the doescode-field.
And a note about DEFERred words - without Direct-Threading, a deferred word will be executed as a doublyindirect call and there is no cpu-nativecode for that. Actually, this is good since a) we want to have the DEFERred vector to be no in the first paramfield and b) we want to check for null in the defervector and warn instead of segfault (or call a routine that CRASHes).
VARIABLE XX : AA XX @ ; in CTC mode (call threaded with conditional body pointer comma) | name... | link | code'do-colon | code'do-var | pfa'XX | code'@ | code'; | n bytes LFA CFA (a cell) cell cell cell cell in SBR mode (subroutine threaded with cpu-native SBR assembler snippets) | name... | link | colon-info | SBR-setupcode | ..... n bytes LFA to infoblock (nothing on x86, 16bytes on powerpc) .... SBR-call + code'do-var | pfa'XX | SBR-call + code'@ | SBR-exitcode | 1 byte + cell cell 1 byte + cell 1 byte (12 on ppc)
The above code will make do-var to fetch the following pfa'XX address from the colon-word with an extra call, thereby adjusting the subroutine return-adress to point to just after the body-arg. This will make some CPU variants picky where the L1 cache is divided into Code-cache and Data-cache. In CTC-derived SBR-threading it means alternating access as Code and Data, and some K6 are known to be panicking as soon as they see a Data-access of an address in the Code-L1-cache and do a complete flush of the Code-cache.
The solution uses arg-threading. Instead of the do-var code implementation to fetch the body-adress being compiled after its call, the SBR-ARG threading will compile an immediate arg-push before the call - which is actually the pfa-address prepended with an SBR-snippet to push it into the right place. The called do-var routine can then just use the value in place.
in SBR-threading .... | to infoblock | .. | SBR-call + code'do-var | pfa'XX | ... cell 0 1 byte + cell cell in SBR-ARG-threading .... | to infoblock | .. | SBR-push + pfa'XX | SBR-call + code'do-var | ... cell 0 1 byte cell 1 byte + cell
Even that we consume yet another byte more, the code will actually run faster on many CPU types - but it depends on the actual implementation of the L1 cache. Another problem is to find a place to bring the value from the colon-routine into the do-var routine without the C compiler to trash the place innocently during its SBR setup. Using a register with the gcc fixed register allocation is one means and often a good one.
On a register-starved architecture like x86, it helps greatly to use the CPU-native SBR-code. These are very fast calls specialized to make a subroutine call. However an architecture like powerpc does not have any specialized subroutine-call instruction, and the return-stack can be referenced from any of its CPU registers.
The problem with the CPU-native SBR-code and RP-register has to do with the habit of forth programs to use to-RP and RP-from instructions to move values from and to the return-stack as temporary values. This will require the implementation of these routines to pop-off the return-address, push/pop the value, and put the return-address back. That can heavily interfere with what the C compiler assumes about the RP depth, not to speak of some CPU architectures to have a special return-address cache that will get flushed hereon.
Instead one make up a three-stack machine, where colon-word return-address are stored on another stack than the C compiler will assume them for. It makes it quite the same as the normal token-threading but the address-tokens are interpreted with some native-code snippet - just not the SBR-call snippet but some other - and it is still native-code SBR threading.